Most hydroponic net pots were designed for one purpose: to hold a plant in a growing medium. Their geometry is borrowed from soil growing — small holes that contain substrate, with roots finding their own way out.

The CALYXA® Air-pot begins with a simple question:: What does a root need to thrive in a passive, electricity‑free system?

Normal netpot — wiht small holes

Conventional net pots use small holes designed to hold soil.

🔍 Why Conventional Net Pots Fall Short

Designed for soil — not for air‑based growing

Conventional net pots use uniform, small holes designed to retain growing media. In passive hydroponics, this creates two problems: roots are physically restricted at the exit points, and the even hole pattern does not guide airflow in any meaningful direction.

When roots emerge through a small hole under mechanical stress, early root tips can be damaged or bent — slowing the plant's ability to establish in the nutrient solution below.

In a passive system, the Air pot is the point where the plant meets moisture, oxygen, temperature stability and support. A basic Air pot does not manage any of these.

🌬️ What Makes the CALYXA® Air-pot Different

Four engineering decisions — one breathable root chamber

CALYXA® Air-pot side view — showing variable openings, height proportions and integrated holder

The CALYXA® Air-pot — variable-size openings, air-guided geometry and an integrated support-stick holder in one molded part

Every dimension and opening in the CALYXA® Air-pot serves a specific function:

Variable-size openings. Instead of a uniform grid of small holes, the Air-pot uses openings that vary in size around the structure. Larger openings let roots emerge freely without physical stress. Smaller openings near the top retain the growing medium and anchor the plant. Roots choose their own path — not the one a small hole forces them into.

Air-guided geometry. The shape of the Air-pot works in direct cooperation with the Air Flow Wings™ in the lid above. As warm, humid air rises and fresh air enters through the 5 mm gap, the Air-pot geometry channels that oxygen-rich airflow directly toward the root zone — not past it. The roots receive a continuous, passive supply of fresh air without any pump or fan.

Optimized proportions — 40×40×43 mm. The height-to-width ratio was chosen to support early root development while keeping the plant stable. The depth ensures that the first roots reach the nutrient solution during the critical early days, while the plant remains anchored securely in the growing medium above.

Integrated support-stick holder. Tall plants — chilies, tomatoes, climbing herbs — need structural support as they grow. The Air-pot includes a built-in channel for a standard support stick, so the plant can be guided upward without separate clips, ties or adapters. No extra accessories required.

🌱 Starting Plants in the CALYXA® Air-pot

Rockwool, seeds — or straight from the store

The intended starting method is simple and clean: a rockwool cube holds a single seed, placed into the Air-pot at the Start Level. The rockwool keeps the seed moist through capillary action during germination, and the first roots grow downward into the humid air zone before reaching the nutrient solution.

For herbs bought at a supermarket — basil, parsley, mint — transplanting is equally straightforward. These plants already come with a compact, stable soil root ball that fits neatly into the Air-pot. The Start Level guides the correct initial water height, allowing the lower roots to access moisture while the upper roots and stem remain in the aerated zone above.

Store-bought herb plants are one of the easiest ways to start with CALYXA®. The root ball is already formed — just place it in the Air-pot, set the water to Start Level, and the system takes over from there.

🌟 A New Generation of Air pot

A breathable root chamber for modern soil-free growing

The CALYXA® Air-pot is not an upgraded Air pot. It is a component that was designed alongside the lid, the reservoir and the Pyramid Locking System™ — as part of a single, integrated system where every part knows what the others do.

Variable openings, air-guided geometry, correct proportions, integrated support. Four decisions. One breathable root chamber.

"Roots don't need a container. They need a beginning."
← Pyramid Locking System™ | All Design Stories →